Introduction
Power Probe 3 combined with the Gold Series Lead Set makes this kit the ultimate in circuit testing diagnosis. The best sidekick to the PP3 is a kit with different connectors, adapters, and extensions. The PP3LS01 was designed to increase the usability for the Power Probe 3 while diagnosing electrical circuits.
Features
– DC Voltmeter indicators provide active feedback
– LED Lights
– Bad Ground-Indicator
– Short Circuit indicator
– Relay and Component Tester
– Audible Monitoring of Electrical Signals
| Specifications |
| – DC 0 – 70V + 1 digit
– P-P 0 – 70V |
| Frequency response of tone pass through |
| – 10Hz to greater than 10 Khz |
| PP display |
| – 15Hz Square Wave
– 35Hz Sine Wave |
| Power Probe Mode – Continuity to ground |
| – First level – display is enabled less than 20K
– Second level – green LED is enabled less than 2K |
| – & + Peak Detector Response |
| – Single event capture less than 200μs pulse width
– Repetitive events less than 1μs pulse width |
| Peak to Peak Mode |
| – 0 – 70V + 1 digit
– 4Hz to over 500kHz Square Wave input – 4Hz to over 250kHz Sine Wave input Threshold for PPAC/Audible passthrough |
| Circuit Breaker |
| 8 amp thermal response – Manual reset
Typical Response |
Ash –
Brilliant, multiple functions has got me out of a pickle many times